Expanding South
- Bigfella237
- Posts: 1899
- Joined: Fri Feb 26, 2010 3:11 pm
- Location: In geosynchronous orbit above the Far South Coast of NSW, Australia
Re: Expanding South
They just patched Uniform with Sierra but there's still no RIDs coming through from the west dammit.
I'm getting IDs from Sierra as usual but I get nothing except "TG=1" from Uniform, this is why I thought Uniform wasn't fully digital yet.
Andrew
I'm getting IDs from Sierra as usual but I get nothing except "TG=1" from Uniform, this is why I thought Uniform wasn't fully digital yet.
Andrew
Re: Expanding South
No that's common, when they patch Sierra and Whiskey together the same happens.
Was an idea i had when we went dark here.
Cheers
Was an idea i had when we went dark here.
Cheers
VK2MRC
Re: Expanding South
When Whiskey and Uniform were patched in 2014 and I was listening off Mt Gibaltar you would see all RIDs except the analogue patch. Most of the time I monitored Papa and Oscar it was the same ... Papa would show up as "1" ... even other parts of Oscar when they were working on the P25 side .. however very close to switching over all the RIDs started to appear. It maybe a consequence of how it is selected on the console
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
-
- Posts: 431
- Joined: Thu Sep 04, 2008 10:47 pm
- Location: Far South Coast NSW
Re: Expanding South
Tried to get DSD+ to work. Have audio going in but it doesn't appear to be doing anything.
I am using a Uniden 996XT, it works well in UniTrunker.
Can anyone suggest anything to try, if not it really doesn't matter, just curious.
I am using a Uniden 996XT, it works well in UniTrunker.
Can anyone suggest anything to try, if not it really doesn't matter, just curious.
Re: Expanding South
DSD+ wouldnt work when I upgraded my laptop to Windows 10, so i reversed the upgrade back to Windows 7.
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
-
- Posts: 431
- Joined: Thu Sep 04, 2008 10:47 pm
- Location: Far South Coast NSW
Re: Expanding South
I am running Windows 10 so that would be it. I haven't got any Windows 7 machines to use either.
- Bigfella237
- Posts: 1899
- Joined: Fri Feb 26, 2010 3:11 pm
- Location: In geosynchronous orbit above the Far South Coast of NSW, Australia
Re: Expanding South
Well we couldn't be any closer to Uniform switching over.cartman wrote: ~ however very close to switching over all the RIDs started to appear. It maybe a consequence of how it is selected on the console
When Romeo is patched into Sierra I get all those RIDs coming up no problem, but with traffic from Uniform I don't even get a console ID. I could understand if the patch was RoIP'd from somewhere else but I'm sure Warilla handles Uniform nowadays (it used to be VKG Wagga but that's been gone for years).
As you suggest, it must be something they're doing wrong on the console?
Re: Expanding South
When Romeo is patched with Sierra do you hear it in clear voice or just the encryption squiggles?
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
- Bigfella237
- Posts: 1899
- Joined: Fri Feb 26, 2010 3:11 pm
- Location: In geosynchronous orbit above the Far South Coast of NSW, Australia
Re: Expanding South
Nope all clear
-
- Posts: 431
- Joined: Thu Sep 04, 2008 10:47 pm
- Location: Far South Coast NSW
Re: Expanding South
Sounds like Far South 704 has jumped in early. Was after a check on someone, was extremely broken. When I looked at the display sure enough ENC when he was broadcasting