![Smile :)](./images/smilies/icon_e_smile.gif)
New FRNSW Incident/Fireground (TASK) Frequencies?
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
I wouldn't bother wasting your ink printing files off RR ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Happily Scanning Since 1983
- rustynswrail
- Posts: 646
- Joined: Thu Mar 11, 2010 10:18 pm
- Location: Blue Mountains
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
You would be surprised at the number of Australians that; 1 - Pay to subscribe to RR and 2 - Contribute to it. I cannot for the life of me understand doing either. RR is a business first and foremost. Unfortunately several of the major scanner manufacturers do see it or at least treat it as gospel.Scotty wrote:Thanks. Goes to show that you can’t take what is on RR as gospel - not that anyone here does!
R
Amateur Radio, when all other cures for insomnia fail!
-
- Posts: 431
- Joined: Thu Sep 04, 2008 10:47 pm
- Location: Far South Coast NSW
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
I will keep an ear out for those channels down here and report when I hear anything
-
- Posts: 431
- Joined: Thu Sep 04, 2008 10:47 pm
- Location: Far South Coast NSW
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
Just occurred to me that FRNSW has been using A510 here for a while, I think they might have used D510 a couple of times but for a fair while I have heard them use Analogue
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
NAC Codes
293 - default NAC
F7E - a receiver set on this will unsquelch with any incoming NAC
F7F - a repeater set on this will allow incoming signals to be repeated with the NAC code intact.
Just fyi have used this many times to get myself out of the trouble
293 - default NAC
F7E - a receiver set on this will unsquelch with any incoming NAC
F7F - a repeater set on this will allow incoming signals to be repeated with the NAC code intact.
Just fyi have used this many times to get myself out of the trouble
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
It is probably important to point out that those NAC's won't work in that fashion when using a scanner. If using a scanner and unsure of the NAC it is best to just leave it either blank or in 'search' mode (depending on the scanner).Comms107 wrote:NAC Codes
293 - default NAC
F7E - a receiver set on this will unsquelch with any incoming NAC
F7F - a repeater set on this will allow incoming signals to be repeated with the NAC code intact.
Just fyi have used this many times to get myself out of the trouble
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
G'day all,
Yes we switched to P25 Fire Ground Freq's late last year.
Currently having new Dual Band Handheld Radio's rolled out in Sydney as well, which have RFS VHF FG Channels too
Yes we switched to P25 Fire Ground Freq's late last year.
Currently having new Dual Band Handheld Radio's rolled out in Sydney as well, which have RFS VHF FG Channels too
JAFO
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
The APX8000 is quad-band, - VHF, all of UHF, as well as 7/800MHz, but of course, the 7/800MHz functionality is wasted here in Oz!!
APX8500 quad-band mobiles are due later this year.
APX8500 quad-band mobiles are due later this year.
JAFO wrote:G'day all,
Yes we switched to P25 Fire Ground Freq's late last year.
Currently having new Dual Band Handheld Radio's rolled out in Sydney as well, which have RFS VHF FG Channels too
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
All I can say is, our Digital Fire Grounds channels are crap. Worse I have seen in my 30 years with the Brigades.
JAFO
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
Re: New FRNSW Incident/Fireground (TASK) Frequencies?
Last nights 8th alarm fire at Moorebank was using 415.4750 NAC 293 P25 Clear as the fireground channel
I was listening from about 3km away.
I was listening from about 3km away.
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview