TASMANIAN GRN

MMR, RMR, SAGRN, GWN, NTESTN, WAERN

TASMANIAN GRN Submission 27/07/20

Postby cartman » Mon Aug 17, 2020 2:48 am

https://www.parliament.tas.gov.au/ctee/ ... ission.pdf

P25 trunking network to be completed by 2023/24
400Mhz with VHF in regional areas
130 sites
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v1.101, WinDSDv2, ADCR25 v5.10, Unitrunker, Trunkview
User avatar
cartman
 
Posts: 2125
Joined: Wed Aug 13, 2008 12:54 pm
Location: Liverpool, NSW, Australia

Re: TASMANIAN GRN

Postby Bigfella237 » Mon Aug 17, 2020 9:02 am

Pumper_50 wrote:Try 514678

Damn, I was hoping they'd use a client ID exclusively for the TASGRN, that ID has sites all over Vic plus one in Adelaide. Why wouldn't the TAS State Govt Telco control all the licencing?

If that's the correct ID, it looks like there's only the one site so far at MT RUMNEY with three VHF and three UHF (TX) freqs licenced:

167.5875
167.8875
168.0375
416.2375
416.7375
417.2375

Andrew
User avatar
Bigfella237
 
Posts: 1864
Joined: Fri Feb 26, 2010 3:11 pm
Location: In geosynchronous orbit above the Far South Coast of NSW, Australia

Re: TASMANIAN GRN

Postby Pumper_50 » Mon Aug 17, 2020 11:11 am

Yeah was just looking in to it again myself.

Perhaps it will change at some point.

The freqs at Mt Rumney that folks have been getting data off are only authorised for 10w going by ACMA

Sent from my SM-G960F using Tapatalk
Regards,
Pumper_50

http://vicradiozone.com
Pumper_50
 
Posts: 78
Joined: Thu May 31, 2012 6:20 pm

Re: TASMANIAN GRN

Postby cartman » Wed Sep 02, 2020 5:50 pm

https://www.parliament.tas.gov.au/ctee/ ... roject.pdf

The actual Hansard transcript of the Tasmanian GRN Project submission (thanks Eric at RF Group Tas for the link)

It actually says it will be Phase 2 and the new network will be encrypted

THE PARLIAMENTARY STANDING COMMITTEE ON PUBLIC WORKS MET IN COMMITTEE ROOM 1 AT PARLIAMENT HOUSE, HOBART, ON MONDAY, 10 AUGUST 2020

PWC - TASMANIAN GOVERNMENT RADIO NETWORK PROJECT

Mr MATTHEW EASTHAM, ACTING CEO, AMBULANCE TASMANIA;
MR CHRIS ARNOL, CHIEF OFFICER, TASMANIAN FIRE SERVICE, DEPARTMENT OF POLICE, FIRE AND EMERGENCY MANAGEMENT;
Mr SCOTT WILSON-HAFFENDEN, PROJECT DIRECTOR, TASMANIAN GOVERNMENT RADIO NETWORK, DEPARTMENT OF POLICE, FIRE AND EMERGENCY MANAGEMENT;
Mr SCOTT TILYARD, PROJECT SPONSOR AND CHAIR TasGRN STEERING COMMITTEE, DEPUTY COMMISSIONER OF POLICE, DEPARTMENT OF POLICE, FIRE AND EMERGENCY MANAGEMENT;
Mr JOHN LLOYD, DIRECTOR OPERATIONS, PARKS AND WILDLIFE SERVICE;

WERE CALLED, MADE THE STATUTORY DECLARATION AND WERE EXAMINED.

Mr ANDREW WELLWOOD, PRINCIPAL TECHNICAL ADVISOR, GENERAL MANAGER MINGARA AUSTRALASIA PTY LTD;
and Mr ROSS ALEXANDER, PRINCIPAL COMMERCIAL ADVISOR, PARTNER INFRASTRUCTURE ADVISORY & CONTESTABILITY, DELOITTE FINANCIAL ADVISORY PTY LTD;

WERE CALLED BY TELECONFERENCE, MADE THE STATUTORY DECLARATION AND WERE EXAMINED.
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v1.101, WinDSDv2, ADCR25 v5.10, Unitrunker, Trunkview
User avatar
cartman
 
Posts: 2125
Joined: Wed Aug 13, 2008 12:54 pm
Location: Liverpool, NSW, Australia

Re: TASMANIAN GRN

Postby cartman » Thu Nov 18, 2021 11:26 am

Tasmanian Government Radio Network

TasGRN Newsletter
Edition 11 - September 2021

TasGRN Core Install
Work is underway to install the Hobart TasGRN Core. This activity is a significant undertaking, involving four tonnes of equipment being installed in multiple locations in the CBD exchanges. Telstra’s technology partner, Motorola, led the installation, following a major local recruitment campaign. Motorola’s Hobart Office was established to support the Project and is a central location for this implementation planning.
The TasGRN is currently available for demonstration, utilising the Melbourne Core. The Hobart Core will go live in October 2021, with sites added as the network build continues throughout the State.

First TasGRN Test Radio Call Made
On 27 July 2021, the first test radio call was made on the new TasGRN console and radio terminals, with the State’s Implementation Steering Committee in attendance. This coincided with Deputy Commissioner and TasGRN Project Sponsor Scott Tilyard’s final week before retirement. Mr. Tilyard has advocated for a whole-of-government radio network for many years, so this call represented a significant milestone which highlighted Mr. Tilyard’s significant contribution.

Demonstration
The TasGRN Project recently hit a significant milestone. Telstra has delivered the TasGRN demonstration platform, so now users can learn about some of the features and capabilities of the TasGRN, as the remainder of the network is being built.

Hands-on demonstrations will run through to March 2022. On offer is the opportunity to play with the TasGRN equipment and for users to get a sneak preview of what it can do.

The demonstration platform has three radio transmission sites established. The sites are based at Chimney Pot Hill, Mt Rumney and Police Headquarters in the Hobart CBD. The three were built early to enable early access to the TasGRN. The initial use of these Demonstration sites will be for radio configuration trials.

Each User Organisation has been involved in regular configuration workshops, and this milestone provides them a real-time environment to trial different configuration options.

The State, Telstra and Motorola teams have worked in partnership to achieve this milestone.

Inquiries from User Organisations about how to join a Demonstration can be directed to the TasGRN Agency Project Leads.

A Spotlight on the Vehicles Team
A major component of the TasGRN transition is the vehicles installation program. Featuring 2,307 vehicles across the eight User Organisations, considerable planning, scheduling, and coordination is required to ensure all vehicles have equipment installed prior to network migration. Installations commence in December 2021.This is a significant piece of work, coordinated on behalf of the State by Wayne Daniels, and Matan Livson of Motorola.

Wayne Daniels provided some further information.

What are the biggest challenges when planning the vehicles stream of work?
“Some of the User Organisations aren’t transitioning to the TasGRN until 2023. We anticipate that all User Organisations will have vehicles change-over in that time, which means we need a detailed understanding of the current fleet lifecycle, to plan for a future fleet installation. Another complication is the fact that our emergency service organisations, Tasmania Police, Tasmania Fire Service, Ambulance Tasmania and the State Emergency Service, operate 24/7. There is no down-time over the weekends to coordinate an installation program. This means we need to understand how and when vehicles are used and identify the least disruptive schedule to enable these organisations to still carry out their day-to-day operations during this installation process.”

Who is involved at a User Organisation level?
“This activity involves working with Fleet Coordinators from each User Organisation. Each Organisation does things a little differently, in terms of operational requirements, which impacts how and when we can coordinate installation.”

What kinds of vehicles are involved in the program?
“There is diversity across the fleet, from highly specialised operational vehicles, including aircraft, watercraft, fire appliances, ambulances and armoured vehicles, to standard passenger cars and motorcycles. Some vehicles are currently equipped with radios, while others aren’t. There’s no one-size-fits-all approach. We are developing the approach for each User Organisation with the right people within the User Organisations.”

What is the approach for vehicle installation?
“We are employing a regionally based approach across four installation phases, starting in the South, then moving North and North-West. The Service Provider will provide several installation locations State-wide and can complete installations in remote locations such as King Island, Flinders Island and Strahan. This means that each vehicle is off the road for a shorter period and will travel a shorter distance their preferred installation location.”


TasNetworks and Hydro commence their vehicle installation programs in December 2021, followed by Tasmania Police in early 2022. The remaining User Organisations will commence their vehicle install programs in later 2022 and 2023, prior to their migration.

Currently infrastructure from Telstra and the Trunked Mobile Radio Network (TMRN) exist on this site. It is a location that will see consolidation of infrastructure through the implementation of the TasGRN. This will create operational and maintenance cost efficiencies through the reduction of duplicated infrastructure.
What is P25 or a public-safety grade network?

P25, or Project 25, refers to a suite of standards that refer to radio communications that are emergency-service grade. A P25 network is digital, rather than analogue, which offers good audio quality, as well as the option for data transfer and encryption. While a P25 network is digital, P25 radios on the TasGRN will still be able to communicate in analogue mode to legacy radios.

P25 networks are described as mission critical, to provide communications when all other systems have failed. This refers to resiliency and reliability of communications that exceed commercial standards. The TasGRN has a complex and robust design, comprised of dual backhaul, which means that if a site goes down, the network is still able to function.

Tasmania is the only state yet to implement a P25 network. The TasGRN will see Tasmania brought into line with national and international radio communications standards.

Copyright © 2021 DPFEM, All rights reserved
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v1.101, WinDSDv2, ADCR25 v5.10, Unitrunker, Trunkview
User avatar
cartman
 
Posts: 2125
Joined: Wed Aug 13, 2008 12:54 pm
Location: Liverpool, NSW, Australia

Re: TASMANIAN GRN

Postby cartman » Thu Nov 18, 2021 1:48 pm

cartman wrote:Tasmanian Government Radio Network

TasGRN Newsletter
Edition 11 - September 2021

TasGRN Core Install
Work is underway to install the Hobart TasGRN Core. This activity is a significant undertaking, involving four tonnes of equipment being installed in multiple locations in the CBD exchanges. Telstra’s technology partner, Motorola, led the installation, following a major local recruitment campaign. Motorola’s Hobart Office was established to support the Project and is a central location for this implementation planning.
The TasGRN is currently available for demonstration, utilising the Melbourne Core. The Hobart Core will go live in October 2021, with sites added as the network build continues throughout the State.

First TasGRN Test Radio Call Made
On 27 July 2021, the first test radio call was made on the new TasGRN console and radio terminals, with the State’s Implementation Steering Committee in attendance. This coincided with Deputy Commissioner and TasGRN Project Sponsor Scott Tilyard’s final week before retirement. Mr. Tilyard has advocated for a whole-of-government radio network for many years, so this call represented a significant milestone which highlighted Mr. Tilyard’s significant contribution.

Demonstration
The TasGRN Project recently hit a significant milestone. Telstra has delivered the TasGRN demonstration platform, so now users can learn about some of the features and capabilities of the TasGRN, as the remainder of the network is being built.

Hands-on demonstrations will run through to March 2022. On offer is the opportunity to play with the TasGRN equipment and for users to get a sneak preview of what it can do.

The demonstration platform has three radio transmission sites established. The sites are based at Chimney Pot Hill, Mt Rumney and Police Headquarters in the Hobart CBD. The three were built early to enable early access to the TasGRN. The initial use of these Demonstration sites will be for radio configuration trials.

Each User Organisation has been involved in regular configuration workshops, and this milestone provides them a real-time environment to trial different configuration options.

The State, Telstra and Motorola teams have worked in partnership to achieve this milestone.

Inquiries from User Organisations about how to join a Demonstration can be directed to the TasGRN Agency Project Leads.

A Spotlight on the Vehicles Team
A major component of the TasGRN transition is the vehicles installation program. Featuring 2,307 vehicles across the eight User Organisations, considerable planning, scheduling, and coordination is required to ensure all vehicles have equipment installed prior to network migration. Installations commence in December 2021.This is a significant piece of work, coordinated on behalf of the State by Wayne Daniels, and Matan Livson of Motorola.

Wayne Daniels provided some further information.

What are the biggest challenges when planning the vehicles stream of work?
“Some of the User Organisations aren’t transitioning to the TasGRN until 2023. We anticipate that all User Organisations will have vehicles change-over in that time, which means we need a detailed understanding of the current fleet lifecycle, to plan for a future fleet installation. Another complication is the fact that our emergency service organisations, Tasmania Police, Tasmania Fire Service, Ambulance Tasmania and the State Emergency Service, operate 24/7. There is no down-time over the weekends to coordinate an installation program. This means we need to understand how and when vehicles are used and identify the least disruptive schedule to enable these organisations to still carry out their day-to-day operations during this installation process.”

Who is involved at a User Organisation level?
“This activity involves working with Fleet Coordinators from each User Organisation. Each Organisation does things a little differently, in terms of operational requirements, which impacts how and when we can coordinate installation.”

What kinds of vehicles are involved in the program?
“There is diversity across the fleet, from highly specialised operational vehicles, including aircraft, watercraft, fire appliances, ambulances and armoured vehicles, to standard passenger cars and motorcycles. Some vehicles are currently equipped with radios, while others aren’t. There’s no one-size-fits-all approach. We are developing the approach for each User Organisation with the right people within the User Organisations.”

What is the approach for vehicle installation?
“We are employing a regional approach across four installation phases, starting in the South, then moving North and North-West. The Service Provider will provide several installation locations State-wide and can complete installations in remote locations such as King Island, Flinders Island and Strahan. This means that each vehicle is off the road for a shorter period and will travel a shorter distance their preferred installation location.”


TasNetworks and Hydro commence their vehicle installation programs in December 2021, followed by Tasmania Police in early 2022. The remaining User Organisations will commence their vehicle install programs in later 2022 and 2023, prior to their migration.

Currently infrastructure from Telstra and the Trunked Mobile Radio Network (TMRN) exist on this site. It is a location that will see consolidation of infrastructure through the implementation of the TasGRN. This will create operational and maintenance cost efficiencies through the reduction of duplicated infrastructure.
What is P25 or a public-safety grade network?

P25, or Project 25, refers to a suite of standards that refer to radio communications that are emergency-service grade. A P25 network is digital, rather than analogue, which offers good audio quality, as well as the option for data transfer and encryption. While a P25 network is digital, P25 radios on the TasGRN will still be able to communicate in analogue mode to legacy radios.

P25 networks are described as mission critical, to provide communications when all other systems have failed. This refers to resiliency and reliability of communications that exceed commercial standards. The TasGRN has a complex and robust design, comprised of dual backhaul, which means that if a site goes down, the network is still able to function.

Tasmania is the only state yet to implement a P25 network. The TasGRN will see Tasmania brought into line with national and international radio communications standards.

Copyright © 2021 DPFEM, All rights reserved
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v1.101, WinDSDv2, ADCR25 v5.10, Unitrunker, Trunkview
User avatar
cartman
 
Posts: 2125
Joined: Wed Aug 13, 2008 12:54 pm
Location: Liverpool, NSW, Australia

Previous

Return to Government Radio Networks (Interstate)

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x