expanding north
- Bigfella237
- Posts: 1899
- Joined: Fri Feb 26, 2010 3:11 pm
- Location: In geosynchronous orbit above the Far South Coast of NSW, Australia
Re: expanding north
G'day Garry,
Any idea which vote groups each of those locations are associated with?
Andrew
Any idea which vote groups each of those locations are associated with?
Andrew
Re: expanding north
Bigfella237 wrote:G'day Garry,
Any idea which vote groups each of those locations are associated with?
Andrew
NOVEMBER
Great Lakes-Manning LAC
Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
- Bigfella237
- Posts: 1899
- Joined: Fri Feb 26, 2010 3:11 pm
- Location: In geosynchronous orbit above the Far South Coast of NSW, Australia
Re: expanding north
Thanks Grant, that's the channel and LAC but I was after the VOTE GROUPS those frequencies are associated with (i.e. which position on the radios)?
AndrewGarry wrote:Taree / Manning has its digi up and running now
The manning vkg digi chs :-
468.0875 berrico
468.9375 mt marie
468.6875 taree station
469.425 forster
468.3625 seal rocks
469.0125 whoota whoota lookout
467.9375 cabbage tree mtn
469.4125 mt gan ghat,gloucester
469.3375 or 469.375 from middle brother mtn (Im not sure which of these two are being used, as one of them will form the Mid Nth Coast net)
Re: expanding north
I have posted this previously - check page 3
Grant
Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
- Bigfella237
- Posts: 1899
- Joined: Fri Feb 26, 2010 3:11 pm
- Location: In geosynchronous orbit above the Far South Coast of NSW, Australia
Re: expanding north
Ah, thanks!
Andrew
Andrew
Re: expanding north
Just an update for the north coast, just spent a couple of days around the tweed area and there was no p25 running at all, still analog vhf / uhf.
Re: expanding north
when I was at Tweed 2 months back I was able to hear the P25 Coffs/Grafton net at times, but as you said,, the tweed area itself is still UHF/VHF
Happily Scanning Since 1983
Re: expanding north
I am up in the Port Macquarie area this weekend
Will check it out shortly to see what is happening here
A month or so ago, 468.725Mhz (normally active with 468.075Mhz) had been switched off, so i will be interested to see if this frequency has been "upgraded"
Grant
Will check it out shortly to see what is happening here
A month or so ago, 468.725Mhz (normally active with 468.075Mhz) had been switched off, so i will be interested to see if this frequency has been "upgraded"
Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Re: expanding north
Just had a listen then from Port Macquarie while i am up here this weekend
ZONE 3 POSITION 62 Common Input 459.8750Mhz 469.3750 Middle Brother is now active on NOVEMBER
According to the ACMA 469.3750 is also part of:
ZONE 3 VOTE 163 Common Input 459.9125Mhz
468.0875 Gloucester
468.9375 Taree
468.6875 Taree
469.3750 Middle Brother
468.1375 Mt Cairncross
469.4125 Gloucester
Grant
ZONE 3 POSITION 62 Common Input 459.8750Mhz 469.3750 Middle Brother is now active on NOVEMBER
According to the ACMA 469.3750 is also part of:
ZONE 3 VOTE 163 Common Input 459.9125Mhz
468.0875 Gloucester
468.9375 Taree
468.6875 Taree
469.3750 Middle Brother
468.1375 Mt Cairncross
469.4125 Gloucester
Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Re: expanding north
Visiting my mother for a couple of days in Port Macquarie
Port Macquarie (Oscar) still transmitting in analog on its usual 468.075 and 468.725 allocation
P25 CLR (Tx Middle Brother Mt) on 469.3750 also making the trip into Port Macquarie where I am near the airport
My PSR800 shows that the NAC is the usual 61F and that there is a blanket rid of "5" for dispatcher and cars
However when a local Taree car broadcast into the Middle Brother P25 repeater directly I saw the vehicle rid appear for a brief quarter of a second (212xxx).
Suspect that each P25 site in November has those comparator gizmos we saw in Sydney back in 2006 - used for multiple signals on the one channel
Grant
Port Macquarie (Oscar) still transmitting in analog on its usual 468.075 and 468.725 allocation
P25 CLR (Tx Middle Brother Mt) on 469.3750 also making the trip into Port Macquarie where I am near the airport
My PSR800 shows that the NAC is the usual 61F and that there is a blanket rid of "5" for dispatcher and cars
However when a local Taree car broadcast into the Middle Brother P25 repeater directly I saw the vehicle rid appear for a brief quarter of a second (212xxx).
Suspect that each P25 site in November has those comparator gizmos we saw in Sydney back in 2006 - used for multiple signals on the one channel
Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview