Page 1 of 1

Unitrunker via SDR

Posted: Tue Jul 16, 2013 3:07 pm
by criten
Was looking at this setup the other day... will have to give it a whirl over the next few weeks.

http://public-xrp.s3.amazonaws.com/docs ... ptrunk.htm

One thought occurred that it could be possible to monitor 2 control channels (2 different sites) and 2 talkgroups at the same time using 4 radios. A big step up from what my Uniden 396T presently is doing.

Re: Unitrunker via SDR

Posted: Thu Jul 18, 2013 4:12 pm
by kevnerd486
I have a cheap TV dongle running under SDRsharp and feeding Unitrunker to watch my local GRN site. Saves tying up a scanner just to listen to the control channel, works well and a lot cheaper than buying a dedicated scanner.

regards

Kev

Re: Unitrunker via SDR

Posted: Sun May 18, 2014 3:08 pm
by harrold
New version of Unitrunker has direct control of Tv tuner. There is no need to use SDRsharp and Unitrunker together.

The tuner must be RTL2832U 820T type usb dongle.

I have 4 of these going at the same time with my notebook and they work great. They come with a UHF antenna which is good for 416Mhz.

I have found that if you have a frequency of 417.4625, you tune the Tv tuner 225khz down, which makes it 417.4400.

Cheers

Harry

Re: Unitrunker via SDR

Posted: Wed Jan 23, 2019 5:22 pm
by Macca
I’m using hdsdr do you just have to put the control channel in on your nearest grn to work ??!!


Sent from my iPhone using Tapatalk

Re: Unitrunker via SDR

Posted: Tue Apr 02, 2019 8:49 pm
by Chrisco
harrold wrote:New version of Unitrunker has direct control of Tv tuner. There is no need to use SDRsharp and Unitrunker together.

The tuner must be RTL2832U 820T type usb dongle.


I have found that if you have a frequency of 417.4625, you tune the Tv tuner 225khz down, which makes it 417.4400.


Harry
Sweet! thanks Harry for that