NSWFB
- rustynswrail
- Posts: 646
- Joined: Thu Mar 11, 2010 10:18 pm
- Location: Blue Mountains
NSWFB
RID 2929132 affiliated with TG10123. Message passed was from Rescue Pumper 503 (Wollongong) to Control. Could have been a bridge (smart or otherwise) but the audio sounded too good. So not sure.
Hello Richard are you there?
R
ADDENDUM:
2929132 is a bridge. Appliance RID 2007797 noted.
R
Hello Richard are you there?
R
ADDENDUM:
2929132 is a bridge. Appliance RID 2007797 noted.
R
Amateur Radio, when all other cures for insomnia fail!
Re: NSWFB
Rusty,
2929132 is the P25 BIM ID (the patch is being done by connecting one 4.1 BIM to a P25 BIM). This will appear every time a radio or operator on the 4.1 side tx's. I guess the patched audio mustn't be too bad! The only station you should hear on P25, for now, is Queanbeyan. Their ID will give them away.
Cheers,
Richard
2929132 is the P25 BIM ID (the patch is being done by connecting one 4.1 BIM to a P25 BIM). This will appear every time a radio or operator on the 4.1 side tx's. I guess the patched audio mustn't be too bad! The only station you should hear on P25, for now, is Queanbeyan. Their ID will give them away.
Cheers,
Richard
Re: NSWFB
It is just a trumped up 4 wire (600ohm) + signalling interface designed to connect the Centracom to the outside analogue world. I'm 99.9% sure there is no vocoding done in a BIM.citabria wrote:Does the BIM do any vocoding or does it pass voice in digital form?
Cheers,
Richard
Re: NSWFB
2929132 BIM is running in P25 encryption this afternoon on Talkgroup 10126 which if we take the leaks as corrects is "D307 ACT-NSW 10126"
Grant
Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Re: NSWFB
Probably, all I know is that we are not using that BIM-BIM patch as we were while only Queanbeyan were on P25. We now have a console running on the P25 network as there are no Wollongong GRN stations still on 4.1. In other words we don't need it anymore. For those scratching their heads at what is going on- when the "P25 console" is running a 207xxxx ID will be seen. Moto are using this ID group for Centracoms. When the operator is using an RF control (so that they can use a 4.1 console so that they can answer PMR traffic as well as GRN traffic) you will see the RF control ID (200xxxx). The audio from the back up is not as clear because of compression on the link back to the CEB. This is a project underway now- to get rid of this link- as compression & P25 do not like each other.
Cheers,
Richard
Cheers,
Richard
-
- Posts: 1
- Joined: Mon Feb 14, 2011 6:49 pm
Re: NSWFB
I am listening to RP 428 right now with a RID of 2009183Longreach wrote:RID 2008400 is RP 428
havint caught the tanker yet
cheers
Matt
Re: NSWFB
I have been listening off Chullora this afternoon to Newcastle Fire Channel D112
The patch/link to the North PMR sound great on digital (logged the 207XXXX rids for dispatchers and linbks)
Even heard a Queensland appliance call up ("570 Sierra" at about 1910hrs)
The "local" appliances on 10112 are booming in
For reasons which are not that clear to me, the Wollongong Comms pmr patch doesn't sound as good at the moment ... more tweaking or links to come?
Grant
PS That 107 digital site has only 5 channels currently (i control 4 voice) but is get a fair working over by various agencies ..... saw it "full" quite a few times
The patch/link to the North PMR sound great on digital (logged the 207XXXX rids for dispatchers and linbks)
Even heard a Queensland appliance call up ("570 Sierra" at about 1910hrs)
The "local" appliances on 10112 are booming in
For reasons which are not that clear to me, the Wollongong Comms pmr patch doesn't sound as good at the moment ... more tweaking or links to come?
Grant
PS That 107 digital site has only 5 channels currently (i control 4 voice) but is get a fair working over by various agencies ..... saw it "full" quite a few times
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview