GRN P25 testing has started.

User avatar
Bigfella237
Posts: 1897
Joined: Fri Feb 26, 2010 3:11 pm
Location: In geosynchronous orbit above the Far South Coast of NSW, Australia

Re: GRN P25 testing has started.

Post by Bigfella237 » Sat Apr 03, 2010 8:01 pm

My mistake Richard, I was talking about the migration of the various services, not the network itself. I spent about an hour driving around Canberra searching for Ctrl Chs and the only ones found were the established type II sites, maybe they plan on changing over all sites at once instead of the gradual approach that NSW has taken?

And BTW, I didn't say "single Comcen", I said "common Comcen". I don't know if there actually is a backup Comms Centre but as you say, they would be silly not to have a redundancy plan in place?

Andrew

ivahri
Posts: 843
Joined: Sun May 31, 2009 8:24 pm

Re: GRN P25 testing has started.

Post by ivahri » Sat Apr 03, 2010 9:16 pm

Hi Andrew,

That's OK- I read it as single, which is my mistake.

You should see the ACT sites switched over very soon. The switch over is going to happen in the next few months (my guess 2-3 months) unless there are unforeseen problems with the links but I doubt that is going to happen as the link upgrades are moving very quickly now.

Cheers,


Richard

Longreach
Posts: 1085
Joined: Mon Aug 25, 2008 7:38 pm
Location: Goulburn NSW

Re: GRN P25 testing has started.

Post by Longreach » Mon Apr 05, 2010 10:17 pm

Hi all, i work down there nearly everyday and the new backup control channels are already appearing on all the sites down there according to unitrunker, much like they did in sydney a few months ago.

also for everyones info was coming back thru Forbes today and spotted the first control channel out the central west for the P25 system. came up on my pro 96 as site 0215 cc was 417.300mhz.

cheers
VK2MRC

User avatar
jaskel
Posts: 261
Joined: Thu Feb 18, 2010 7:37 pm
Location: Penriff NSW

Re: GRN P25 testing has started.

Post by jaskel » Mon Apr 05, 2010 10:25 pm

yeah got that ch in already.

Has anyone got the latest CC freq for P25?? I got these ones:

Image
Uniden UBCD996XT - Uniden UBCD396XT - Realistic Pro96 - Uniden UBC 120XLT - Uniden RH96 Remote Head - Scanheads Discone - Rh771,701 Whips - GME TX3420 - Icom ICR310 - Icom IC410F

User avatar
Bigfella237
Posts: 1897
Joined: Fri Feb 26, 2010 3:11 pm
Location: In geosynchronous orbit above the Far South Coast of NSW, Australia

Re: GRN P25 testing has started.

Post by Bigfella237 » Mon Apr 05, 2010 10:37 pm

Longreach wrote:...coming back thru Forbes today and spotted the first control channel out the central west for the P25 system. came up on my pro 96 as site 0215 cc was 417.300mhz...
Sounds like that may have been off Mt Coonambro which was Zone 1 Site 37 on the old system?

Andrew

Longreach
Posts: 1085
Joined: Mon Aug 25, 2008 7:38 pm
Location: Goulburn NSW

Re: GRN P25 testing has started.

Post by Longreach » Tue Apr 06, 2010 6:30 am

yep im guessing that would be right, was reasonably strong but not 'blowing my doors off'.
didnt really scan for much else on the way up although i couold only pick up s319 'tottenham' where i was anyway.
cheers
VK2MRC

Longreach
Posts: 1085
Joined: Mon Aug 25, 2008 7:38 pm
Location: Goulburn NSW

Re: GRN P25 testing has started.

Post by Longreach » Tue Apr 06, 2010 7:28 am

I didn't say "single Comcen", I said "common Comcen". I don't know if there actually is a backup Comms Centre but as you say, they would be silly not to have a redundancy plan in place?
the one 'comcen' i do know of it in Curtin a few km west of Parliment House. the ESA however are moving to a new home out at the old RAAF base at Canberra airport, im not sure however if there is a backup there already.

i believe all the ESA stuff has the same profile, just from listening and watching unitrunker. the SES and RFS use the same TG's a lot of the time and in quiet periods quite often there are 3 TG's patched together. there are even times where the RFS and SES are on the same TG's. quite often the RFS will employ a fireground 'channel' TG to stay off the main channel. and also you hear from time to time act parks people slip over to the RFS OPS channels for a quiet chat only to be told by comcen to 'go away' :)

cheers
VK2MRC

ivahri
Posts: 843
Joined: Sun May 31, 2009 8:24 pm

Re: GRN P25 testing has started.

Post by ivahri » Tue Apr 06, 2010 4:20 pm

Hi all,

The latest update I have is that 32 sites are in wide area P25, a big increase on the past fortnight. Good progress in the NW (Dubbo area).

Cheers,

Richard

User avatar
cartman
Posts: 2181
Joined: Wed Aug 13, 2008 12:54 pm
Location: Liverpool, NSW, Australia

Re: GRN P25 testing has started.

Post by cartman » Tue Apr 06, 2010 5:34 pm

I can hear P25 cc on 419.1500 and 419.1625 from the Blacktown region.
I am using a shopping centre internet setup, and don't have reference to my notebook

Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview

User avatar
Bigfella237
Posts: 1897
Joined: Fri Feb 26, 2010 3:11 pm
Location: In geosynchronous orbit above the Far South Coast of NSW, Australia

Re: GRN P25 testing has started.

Post by Bigfella237 » Tue Apr 06, 2010 6:45 pm

ivahri wrote:...The latest update I have is that 32 sites are in wide area P25...
Any chance of posting an updated list here?

TIA
Andrew

Locked