Hi everyone
Can I confirm if these settings are correct for the NSW GRN
Lo Chan | Hi Chan | Offset | Base | Step
16384 | 20479 | 16384 | 412.4750 | 06.25
I've worked out there is 14 proposed North Coast GRN sites I should be able to receive from my home near Coffs Harbour.
I am planning to program my old 2096 and DTS96 as the frequencies appear on the ACMA database.
Some of the posts on this site are few years old now, and not sure if these settings are still correct.
Regards Allison
ARC96 settings for NSW GRN
-
- Posts: 672
- Joined: Thu Aug 14, 2008 8:22 pm
Re: ARC96 settings for NSW GRN
This previous post has the right settings http://www.scansydney.com/board/viewtop ... +96#p15812
Will allow tracking of sites in the 420MHz band.
Mike
Will allow tracking of sites in the 420MHz band.
Mike
Re: ARC96 settings for NSW GRN
thanks MikeMike Alpha wrote:This previous post has the right settings http://www.scansydney.com/board/viewtop ... +96#p15812
Will allow tracking of sites in the 420MHz band.
Mike