New to NSW Need Help Please
New to NSW Need Help Please
Hi There, i am from Tasmania just moved up here to country NSW, Where i came from we have the Edacs system but up here i dont have a clue how to program the GRN network ,, dont know what Base config? is that a data noise on about 416 Mhz,, i worked out its 12.5 steps and offset not have a clue,, i am using a Uniden 396, also have a Uniden 780, also i have manage to get the site details show up buts thats it,, Many thanks
Re: New to NSW Need Help Please
I don' know what your after. what site are you near? Are you able to use the softwere that came with the scanner? NSW is Mot type 2
Uniden UBCD996T x3 | UBCT-9 | UBCD396T | UBC61XLT | UM423AM | MC2800 | UBC60XLT | ICOM IC-41s/w | IC-M34 | USDS100 | SDR |IC-400PRO
twitter/IG
twitter/IG
Re: New to NSW Need Help Please
hello, i use ARC Pro for both Radios, couple sites are 38,39 Cheers
Re: New to NSW Need Help Please
3A0D or 5D0D or 630D?
Re: New to NSW Need Help Please
Great help there guys.
OK, firstly where are you? GRN is a Motorola type two system and the base and offsets are available on this site if you go to http://www.scansydney.com/information/
How you set these depends on what scanner you are using, so maybe some more info on your location and equipemtn might be in order if you need help.
The NSW GRN is a bit of a complicated system, but once you get your head around it, like EDACS, you will understand it. It is still a trunk system so the concept is the same no matter what system.
OK, firstly where are you? GRN is a Motorola type two system and the base and offsets are available on this site if you go to http://www.scansydney.com/information/
How you set these depends on what scanner you are using, so maybe some more info on your location and equipemtn might be in order if you need help.
The NSW GRN is a bit of a complicated system, but once you get your head around it, like EDACS, you will understand it. It is still a trunk system so the concept is the same no matter what system.
Re: New to NSW Need Help Please
Hi soup, Am near Wellington , i get sites 38,30,40,19,, 3aod pops up as well as 5dod,, as said before i have a Uniden 396t and Uniden 780 i have software programs for both ARC,In arc software gives u a option of your Base config 1,2,3 a
Re: New to NSW Need Help Please
Ok, so try the base and offsets provided on this site on the link I have given you above. Make sure you have a good signal for the control channels.
See how that goes. Using the ARC software you should be OK.
Let us know how that goes.
Only other thing you may find with the GRN where you are is that it won't be greatly active. I have been out western NSW a number of times and some of the GRN sites sit there for hours dead as door nails because there is only a small number of users out that way. NSWFB and ambulance use PMR a lot out that way, as do the RFS. NSWFB are slowly getting onto the GRN more and more out west so they may pop up out there more.
See how that goes. Using the ARC software you should be OK.
Let us know how that goes.
Only other thing you may find with the GRN where you are is that it won't be greatly active. I have been out western NSW a number of times and some of the GRN sites sit there for hours dead as door nails because there is only a small number of users out that way. NSWFB and ambulance use PMR a lot out that way, as do the RFS. NSWFB are slowly getting onto the GRN more and more out west so they may pop up out there more.
Re: New to NSW Need Help Please
citabria wrote:3A0D or 5D0D or 630D?
System Id 630d?
I think you mean 7d3d
Cheers
Grant
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Re: New to NSW Need Help Please
Hello all, Any chance of a config file for a Uniden 396T ? I have GRN up and working on the 780,
thanks
thanks
Re: New to NSW Need Help Please
Drop me a PM and i'll send you one.