Hi all
Can someone recommend a UHF antenna for my Uniden 396 scanner. ideally it should have a SMA connector although I could use the SMA to BNC adapter.
I find I am really only listening to police, RFS and GRN when I am out and think a dedicated UHF antenna would boost reception a bit. I am not expecting miracles as the scanner is quite deaf but hope to get it a bit better.
Mark
UHF antenna for Uniden 396
-
- Posts: 431
- Joined: Thu Sep 04, 2008 10:47 pm
- Location: Far South Coast NSW
-
- Posts: 117
- Joined: Mon Jul 18, 2011 8:43 am
Re: UHF antenna for Uniden 396
My best advice is to use the SMA to BNC connector i used a cable straight to the SMA and ended up have to resolder the connection inside the scanner. as for the antenna i have found the dual band antennas work well on them as they are around the 435 mark for UHF
to many radios as 255 characters is not enough
-
- Posts: 431
- Joined: Thu Sep 04, 2008 10:47 pm
- Location: Far South Coast NSW
Re: UHF antenna for Uniden 396
Thanks for the reply
I will have a look and see what I can come up with
Mark
I will have a look and see what I can come up with
Mark