996 & Remote Head Data Cable
996 & Remote Head Data Cable
Does anyone know where i can get an extension or a longer one, 3 meters isn't quite long enough.
Cheers,
Alex
Cheers,
Alex
Re: 996 & Remote Head Data Cable
Given that one end of the cable is nothing more then a 3.5mm stereo audio cable, go buy yourself a 3.mm stereo female to male headphone extension cable and plug it into that. You can get them in 3 meter lengths, so adding that to your current cable should extend it much further.
something like this should do the trick
http://www.dse.com.au/cgi-bin/dse.store ... View/C1165
something like this should do the trick
http://www.dse.com.au/cgi-bin/dse.store ... View/C1165
Re: 996 & Remote Head Data Cable
Yep, I needed to add another 1m to mine, and it worked well for me, the remote head works fine.soupbones wrote:Given that one end of the cable is nothing more then a 3.5mm stereo audio cable, go buy yourself a 3.mm stereo female to male headphone extension cable and plug it into that. You can get them in 3 meter lengths, so adding that to your current cable should extend it much further.
something like this should do the trick
http://www.dse.com.au/cgi-bin/dse.store ... View/C1165
JAFO
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
Re: 996 & Remote Head Data Cable
I know it works fine. I tested this when I first got my own remote head to see if it would be possible and then maybe put the scanner in the boot of the car but unfortunately you still need to have audio the scanner so that idea went out the window.
Re: 996 & Remote Head Data Cable
A suggestion, I know the Uniden TrunkTracker Scanners have had shocking Audio Quality output on GRN, very low. I made up a 3.5mm audio plug and connected my UBC245 up to an old Graphic Equalizer, worked a treat boosting the audio out put of my Uniden TrunkTracking Scanners.soupbones wrote:I know it works fine. I tested this when I first got my own remote head to see if it would be possible and then maybe put the scanner in the boot of the car but unfortunately you still need to have audio the scanner so that idea went out the window.
I know they are hard to find these days, well I have not seen one in stores for years but I still use my old Graphic Equalizer to boost the 996T audio, works a treat.
JAFO
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
VK2FGQ
UBCD369XT, UBCD536-PT, UBCD436-PT
Re: 996 & Remote Head Data Cable
I just used an amplified extension speaker made for communications devices. Diamond make them.
-
- Posts: 672
- Joined: Thu Aug 14, 2008 8:22 pm
Re: 996 & Remote Head Data Cable
I made my own powered speaker years ago using a similar amp kit to this
Fits easily into most existing comms speakers.
http://www.jaycar.com.au/productView.as ... BCATID=557
I included a bypass/power switch.
Mike
Fits easily into most existing comms speakers.
http://www.jaycar.com.au/productView.as ... BCATID=557
I included a bypass/power switch.
Mike
Re: 996 & Remote Head Data Cable
OatleyElectronics.com K105 - AUDIO AMPLIFIER KIT
[K105] $9.00
This is a fab kit and is only $9, it is the only way to go.
http://secure.oatleyelectronics.com//pr ... 14394b5a43
An LM380 based audio power amplifier which can directly drive a speaker from a line output. Has 32mm round PCB.
[K105] $9.00
This is a fab kit and is only $9, it is the only way to go.
http://secure.oatleyelectronics.com//pr ... 14394b5a43
An LM380 based audio power amplifier which can directly drive a speaker from a line output. Has 32mm round PCB.