UBCD436/536 GPS

Post Reply
kevnerd486
Posts: 186
Joined: Thu Aug 14, 2008 6:46 pm
Location: Richmond

UBCD436/536 GPS

Post by kevnerd486 » Tue Jul 03, 2018 5:30 pm

Hi All,

Anyone using a UBCD436 or 536 with a GPS and the GRN set up with location info? I had this work well with my 996 but cant seem to get it working with a 536. Every time i activate location control i get the dreaded"nothing to scan" screen and yes i have location data for the sites set.

Help!!!!!!

Kev

kevnerd486
Posts: 186
Joined: Thu Aug 14, 2008 6:46 pm
Location: Richmond

Re: UBCD436/536 GPS

Post by kevnerd486 » Mon Jul 09, 2018 10:26 pm

Ok I’ve worked it out,

Unlike the first generation gps enabled scanners (996) in the Home Patrol (HP) versions you have to put loacation date against the sites (as early versions) but also against Departments!!!

And due to the favourites structure anything under a location enabled favourite requires GPS data to be scanned.

At firsts I thought this would be problematic for the GRN but you are able to set a large
range against the departments ( I set it at 1000 miles) which means departments are always in range in NSW.

Oblivious the range set for sites is seperate and set to normal RF range, which varies depending to how fussy you want to be but an average of 25 miles works ( although I’ve tweeked that for the Sydney metro area).

I would love to know if any one else uses gps location scanning, I have used it for a long time with my 996 and glad I’ve now got it working with the current generation HP scanners.

Regards

Kev

User avatar
JAFO
Posts: 495
Joined: Fri Aug 15, 2008 10:35 pm

Re: UBCD436/536 GPS

Post by JAFO » Fri Oct 30, 2020 1:26 pm

Thanks Kevin, handy to know as I'm about to go down this track in the coming month as I fit and start using the UBCD536-PT in the car with GPS scanning
JAFO
VK2FGQ

UBCD369XT, UBCD536-PT, UBCD436-PT

User avatar
JAFO
Posts: 495
Joined: Fri Aug 15, 2008 10:35 pm

Re: UBCD436/536 GPS

Post by JAFO » Sun Nov 01, 2020 3:58 pm

kevnerd486 wrote:Hi All,

Anyone using a UBCD436 or 536 with a GPS and the GRN set up with location info? I had this work well with my 996 but cant seem to get it working with a 536. Every time i activate location control i get the dreaded"nothing to scan" screen and yes i have location data for the sites set.

Help!!!!!!

Kev
Hy Kev,

What GPS did you use?

I'm using my Old Garmin 12V Connection OEM GPS Serial antenna, that I use to use with the 996T, the GPS indicator is displayed on the screen but the UBCD536PT doesn't seen to recognise the Garmin GPS.

Any suggestions?
JAFO
VK2FGQ

UBCD369XT, UBCD536-PT, UBCD436-PT

Post Reply