Uniden releasing DMR upgrade for 436/536

User avatar
rustynswrail
Posts: 646
Joined: Thu Mar 11, 2010 10:18 pm
Location: Blue Mountains

Re: Uniden releasing DMR upgrade for 436/536

Post by rustynswrail » Sun Jul 29, 2018 9:14 am

Scotty wrote:$85.00 for DMR and $75.00 for NXDN... hmm. A little above the US pricing, which is a pity.

What’s more intriguing is that there is also an upgrade option for a ‘USD100’ model. Would it be reasonable to assume the SDS100 will be making an appearance in AU market soon?
Reasonable but not necessarily soon. Though the definition of soon is the question.

R
Amateur Radio, when all other cures for insomnia fail!

Scotty
Posts: 739
Joined: Sun Dec 20, 2009 2:50 am
Location: Sydney and surrounds

Uniden releasing DMR upgrade for 436/536

Post by Scotty » Sun Jul 29, 2018 3:45 pm

Of note, the EU version of the 436-PT (the UBCD3600XLT), which had included DMR since its release, also had NXDN made available, as of early July 2018.

You can either purchase the scanner with NXDN activated, or you can get NXDN as a paid extra.

pks
Posts: 101
Joined: Wed Aug 13, 2008 12:26 pm

Re: Uniden releasing DMR upgrade for 436/536

Post by pks » Tue Jul 31, 2018 2:37 pm

Link stopped working :cry:

frankc
Posts: 65
Joined: Thu Aug 14, 2008 10:51 pm
Location: Middle Swan WA

Re: Uniden releasing DMR upgrade for 436/536

Post by frankc » Tue Jul 31, 2018 3:08 pm

pks wrote:
Link stopped working :cry:
Apparently it was a "Test Site" by Uniden to iron out bugs etc - and those of us who bought Keys successfully may ave helped them - Word is that it should got "Live" offically at the "End Of The Month" - which is Today (31st)

Pumper_50
Posts: 79
Joined: Thu May 31, 2012 6:20 pm

Re: Uniden releasing DMR upgrade for 436/536

Post by Pumper_50 » Tue Jul 31, 2018 6:57 pm

I'm just not 100% certain they meant this month, but at least we know for certain progress has been made and it's happening.

We'll know soon enough.

Sent from my SM-G960F using Tapatalk
Regards,
Pumper_50

http://vicradiozone.com

frankc
Posts: 65
Joined: Thu Aug 14, 2008 10:51 pm
Location: Middle Swan WA

Re: Uniden releasing DMR upgrade for 436/536

Post by frankc » Wed Aug 01, 2018 1:38 pm

For the lucky Few who have already bought the Upgrades, there is a new version of Sentinal - https://www.uniden.com.au/Downloads/UBC ... _03_00.zip

Wonky
Posts: 302
Joined: Thu Aug 14, 2008 6:08 pm

Re: Uniden releasing DMR upgrade for 436/536

Post by Wonky » Sun Aug 05, 2018 7:16 pm

Can anyone else who has the done the DMR upgrade and monitoring a DT3 system or systems tell me if they are also noticing this: if a call starts on a system (and before the scanner has stopped on that system), then the scanner does not stop on that call when it does start to scan or search the respective system? If the scanner is monitoring that system at the time a call starts then it decodes it perfectly...

frankc
Posts: 65
Joined: Thu Aug 14, 2008 10:51 pm
Location: Middle Swan WA

Re: Uniden releasing DMR upgrade for 436/536

Post by frankc » Mon Aug 06, 2018 5:09 pm

Wonky wrote:Can anyone else who has the done the DMR upgrade and monitoring a DT3 system or systems tell me if they are also noticing this: if a call starts on a system (and before the scanner has stopped on that system), then the scanner does not stop on that call when it does start to scan or search the respective system? If the scanner is monitoring that system at the time a call starts then it decodes it perfectly...
Speaking of3:

How do you program a DT3 system where there is only one Frequency licenced- https://web.acma.gov.au/rrl/licence_sea ... 10085645/1

Wonky
Posts: 302
Joined: Thu Aug 14, 2008 6:08 pm

Re: Uniden releasing DMR upgrade for 436/536

Post by Wonky » Mon Aug 06, 2018 6:25 pm

Frank if it is showing up as DT3 system I suspect one or more of the other frequencies will be for the system (ACMA is not always 100% on the money). A couple of ways to check, put all of the listed freqs: 162.8250, 163.3625, 163.5875, 163.7625 and 165.0375 in as a DT3 system and then run the LCN finder...if it is not a busy system it might take many hours to find the LCN's. You could also try monitoring the control channel with DSD+ or simply monitor the frequencies in analogue and see if you hear digital or not.

frankc
Posts: 65
Joined: Thu Aug 14, 2008 10:51 pm
Location: Middle Swan WA

Re: Uniden releasing DMR upgrade for 436/536

Post by frankc » Mon Aug 06, 2018 6:38 pm

Wonky wrote:Frank if it is showing up as DT3 system I suspect one or more of the other frequencies will be for the system (ACMA is not always 100% on the money). A couple of ways to check, put all of the listed freqs: 162.8250, 163.3625, 163.5875, 163.7625 and 165.0375 in as a DT3 system and then run the LCN finder...if it is not a busy system it might take many hours to find the LCN's. You could also try monitoring the control channel with DSD+ or simply monitor the frequencies in analogue and see if you hear digital or not.
162.825 - definately digital cos I've heard voice which is mainly Swan Community Transport

1845872
162.825 MHz 7K60FXE T
City of Swan (1601513)
10085645/1
963849
163.3625 MHz 10K1F3E T
City of Swan (1601513)
1602531/1
963857
163.5875 MHz 10K1F3E T
City of Swan (1601513)
1602532/1
963841
163.7625 MHz 10K1F3E T
City of Swan (1601513)
1602530/1
776618
165.0375 MHz 10K1F3E T
City of Swan (1601513)



some of those others have analogue with CTCSS codes and were still active till about last week

Post Reply