Fire and Rescue NSW upgrades to Tait P25
Re: Fire and Rescue NSW upgrades to Tait P25
Dareton. There is also a site in Wentworth I believe on 423.7125 with a NAC of 100 as well.
Re: Fire and Rescue NSW upgrades to Tait P25
FRNSW has about 140 PMR sites across the state. The southern/south western areas of the state have either been upgraded to P25 base voting or is in the process of being done.kevnerd486 wrote:Is this system for areas not coverd by the GRN?
Regards
Kev
The area through Crookwell to Cootamundra, plus Junee and Temora were upgraded in the past month...
Richard
Re: Fire and Rescue NSW upgrades to Tait P25
No site in Wentworth, it is at Dareton.CodeOne wrote:Dareton. There is also a site in Wentworth I believe on 423.7125 with a NAC of 100 as well.
-
- Posts: 106
- Joined: Sun Nov 08, 2009 12:35 am
- Location: sw sydney
Re: Fire and Rescue NSW upgrades to Tait P25
Yesterday at Liverpool Hospital Busby and Cabramatta turned up for a fire alarm! They were covering Liverpool who were at a House fire in Casula!! Spoke to one of the Drivers then when I got about 2 metres from the truck got a close call hit.. It was one of the stations inside the alarm panel talking to the other inside the hospital using 425.5875 ctcss 218.1- Heard them say they were going to reset the control panel!!
Thanks sw sydney scanner. Using UBCD396T
Re: Fire and Rescue NSW upgrades to Tait P25
Analog 425.5875 has been around a long time according to the ACMA
Licence 1226538, Issued 5th November 2002
NSWGRN - Simplex 5w
Apparently FRNSW incident channel 510 according to some googling
Licence 1226538, Issued 5th November 2002
NSWGRN - Simplex 5w
Apparently FRNSW incident channel 510 according to some googling
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Scanners:
Uniden 325P2, Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 3, Uniden 796, Uniden 396 x 2, Uniden 246,
Software:
DSD v2.368, Unitrunker, Trunkview
Re: Fire and Rescue NSW upgrades to Tait P25
You would have heard some MDC signalling after the TX too I believe.cartman wrote:Analog 425.5875 has been around a long time according to the ACMA
Licence 1226538, Issued 5th November 2002
NSWGRN - Simplex 5w
Apparently FRNSW incident channel 510 according to some googling
Unless they've removed this recently.
Re: Fire and Rescue NSW upgrades to Tait P25
Another area just gone across to P25... this time the Riverina covering towns like Griffith and Narrandera.
Cheers
Richard
Cheers
Richard