Fire and Rescue NSW upgrades to Tait P25

Re: Fire and Rescue NSW upgrades to Tait P25

Postby CodeOne » Thu Dec 04, 2014 10:11 am

Dareton. There is also a site in Wentworth I believe on 423.7125 with a NAC of 100 as well.
CodeOne
 
Posts: 18
Joined: Tue Mar 09, 2010 7:30 pm

Re: Fire and Rescue NSW upgrades to Tait P25

Postby ivahri » Thu Dec 04, 2014 10:18 pm

kevnerd486 wrote:Is this system for areas not coverd by the GRN?

Regards

Kev


FRNSW has about 140 PMR sites across the state. The southern/south western areas of the state have either been upgraded to P25 base voting or is in the process of being done.

The area through Crookwell to Cootamundra, plus Junee and Temora were upgraded in the past month...


Richard
ivahri
 
Posts: 843
Joined: Sun May 31, 2009 8:24 pm

Re: Fire and Rescue NSW upgrades to Tait P25

Postby ivahri » Thu Dec 04, 2014 10:19 pm

CodeOne wrote:Dareton. There is also a site in Wentworth I believe on 423.7125 with a NAC of 100 as well.


No site in Wentworth, it is at Dareton.
ivahri
 
Posts: 843
Joined: Sun May 31, 2009 8:24 pm

Re: Fire and Rescue NSW upgrades to Tait P25

Postby CodeOne » Fri Dec 05, 2014 5:14 pm

^ Ok.
CodeOne
 
Posts: 18
Joined: Tue Mar 09, 2010 7:30 pm

Re: Fire and Rescue NSW upgrades to Tait P25

Postby sw sydney scanner » Mon Jan 05, 2015 12:57 am

Yesterday at Liverpool Hospital Busby and Cabramatta turned up for a fire alarm! They were covering Liverpool who were at a House fire in Casula!! Spoke to one of the Drivers then when I got about 2 metres from the truck got a close call hit.. It was one of the stations inside the alarm panel talking to the other inside the hospital using 425.5875 ctcss 218.1- Heard them say they were going to reset the control panel!!
Thanks sw sydney scanner. Using UBCD396T
sw sydney scanner
 
Posts: 106
Joined: Sun Nov 08, 2009 12:35 am
Location: sw sydney

Re: Fire and Rescue NSW upgrades to Tait P25

Postby cartman » Mon Jan 05, 2015 3:58 am

Analog 425.5875 has been around a long time according to the ACMA
Licence 1226538, Issued 5th November 2002
NSWGRN - Simplex 5w

Apparently FRNSW incident channel 510 according to some googling
Professional Scanner nut. Ibis bin chicken of radio scraps
Scanners:
Whistler TRX-1, GRE PSR800 x 2, Uniden 780 x 2, Uniden 796, Uniden 396 x 2, Uniden 246, GRE Pro96.
Software:
DSD v1.101, WinDSDv2, ADCR25 v5.10, Unitrunker, Trunkview
User avatar
cartman
 
Posts: 1978
Joined: Wed Aug 13, 2008 12:54 pm
Location: Liverpool, NSW, Australia

Re: Fire and Rescue NSW upgrades to Tait P25

Postby astro_boy » Tue Jan 06, 2015 6:01 pm

cartman wrote:Analog 425.5875 has been around a long time according to the ACMA
Licence 1226538, Issued 5th November 2002
NSWGRN - Simplex 5w

Apparently FRNSW incident channel 510 according to some googling


You would have heard some MDC signalling after the TX too I believe.
Unless they've removed this recently.
astro_boy
 
Posts: 247
Joined: Wed Aug 13, 2008 7:41 am

Re: Fire and Rescue NSW upgrades to Tait P25

Postby ivahri » Wed Feb 25, 2015 9:17 pm

Another area just gone across to P25... this time the Riverina covering towns like Griffith and Narrandera.

Cheers

Richard
ivahri
 
Posts: 843
Joined: Sun May 31, 2009 8:24 pm

Previous

Return to Fire & Rescue NSW

Who is online

Users browsing this forum: No registered users and 2 guests

cron

x