Uniden releasing DMR upgrade for 436/536

Re: Uniden releasing DMR upgrade for 436/536

Postby frankc » Tue Aug 07, 2018 2:35 pm

frankc wrote:
Wonky wrote:Frank if it is showing up as DT3 system I suspect one or more of the other frequencies will be for the system (ACMA is not always 100% on the money). A couple of ways to check, put all of the listed freqs: 162.8250, 163.3625, 163.5875, 163.7625 and 165.0375 in as a DT3 system and then run the LCN finder...if it is not a busy system it might take many hours to find the LCN's. You could also try monitoring the control channel with DSD+ or simply monitor the frequencies in analogue and see if you hear digital or not.


163.5875 MHz 10K1F3E T
City of Swan (1601513)
1602532/1

Definately analogue with a CTCSS code 88.5 used for Garbage Disposal.
frankc
 
Posts: 65
Joined: Thu Aug 14, 2008 10:51 pm
Location: Middle Swan WA

Re: Uniden releasing DMR upgrade for 436/536

Postby Pumper_50 » Thu Aug 16, 2018 4:58 pm

Scanner Upgrade page is active again.

https://uniden.com.au/product/scanner-upgrade/

Sent from my SM-G960F using Tapatalk
Regards,
Pumper_50

http://vicradiozone.com
Pumper_50
 
Posts: 74
Joined: Thu May 31, 2012 6:20 pm

Re: Uniden releasing DMR upgrade for 436/536

Postby Wonky » Tue Oct 09, 2018 7:38 pm

For those who have done the DMR upgrade on their 436/536PT, I am wondering what you think of the performance when tracking TIII (in particular) or Cap+ systems?

I find when locked on one site only on the 536 and having DSD+ running on the pc on the same site, DSD+ is picking up quite a few more transmissions...

Anyone else experience similar?
Wonky
 
Posts: 274
Joined: Thu Aug 14, 2008 6:08 pm

Previous

Return to Uniden

Who is online

Users browsing this forum: No registered users and 1 guest

x