Tunnel Operations - Sydney
Tunnel Operations - Sydney
I found Sydney Harbour Tunnel new frequency it is 510.5125 for there operations.
Also the ED/X City is 508.875 MHz and Lane Cove is 497.8875 MHz .
Good listening if they get a incident !!!
Also the ED/X City is 508.875 MHz and Lane Cove is 497.8875 MHz .
Good listening if they get a incident !!!
Rural Fire Service member , scanner nut 25 years , owns a undien 396xt and a uniden 996
Re: Tunnel Operations - Sydney
did you get the ctcss tone on the Harbour Tunnel freq
Happily Scanning Since 1983
Re: Tunnel Operations - Sydney
Garry , I was in the right place at the right time...
Rural Fire Service member , scanner nut 25 years , owns a undien 396xt and a uniden 996
Re: Tunnel Operations - Sydney
umm OK,, any chance you can let me know the ctcss tone that was on that freq please
Happily Scanning Since 1983
- rustynswrail
- Posts: 646
- Joined: Thu Mar 11, 2010 10:18 pm
- Location: Blue Mountains
Re: Tunnel Operations - Sydney
The Lane Cove freq should be 492.6875. 497.8875 is the repeater input. Same for SH Tunnel, freq is 500.5125. 510.5125 is also an input.Adpad wrote:I found Sydney Harbour Tunnel new frequency it is 510.5125 for there operations.
Also the ED/X City is 508.875 MHz and Lane Cove is 497.8875 MHz .
Good listening if they get a incident !!!
R
Amateur Radio, when all other cures for insomnia fail!
Re: Tunnel Operations - Sydney
Garry I will let you know the ctss over the next couple of days.
Adam
Adam
Rural Fire Service member , scanner nut 25 years , owns a undien 396xt and a uniden 996
Re: Tunnel Operations - Sydney
Adam,, go here http://lakescan.customer.netspace.net.au/RTA.html
Happily Scanning Since 1983
Re: Tunnel Operations - Sydney
Eastern Distributor road crew are on 470.500 - st-162.2
508.875 - st-127.3 used by LSE TECHNOLOGY on Eastern Distributor
M5 MOTORWAY CONTROL - 509.350 - st-114.8
John.
508.875 - st-127.3 used by LSE TECHNOLOGY on Eastern Distributor
M5 MOTORWAY CONTROL - 509.350 - st-114.8
John.