Page 3 of 3
Re: Pager decoding software
Posted: Fri Aug 14, 2015 9:58 pm
by Wonky
I am with Andrew, never had any success with headphone audio, get a disc. tapped scanner if you can.
Re: Pager decoding software
Posted: Fri Aug 14, 2015 10:23 pm
by commsmc
The program I used a long time ago that worked with just the headphone audio was Poc32. It was able to decode 512bps fairly well with just the right audio level (25% on the audio level bar on the software from memory). If the audio level was too low or high it would fail to decode. At higher baud rates it would be very touch and go. Decoding was far more reliable of course with a discriminator tap and I would highly recommend that. I'm not sure you can still get Poc32 or if it's still around. It's a Windows based program.
Re: Pager decoding software
Posted: Mon Aug 17, 2015 1:13 pm
by astro_boy
Re: Pager decoding software
Posted: Tue Aug 18, 2015 7:32 pm
by Adapad
Will this work with 996t or 396xt
Re: Pager decoding software
Posted: Thu Aug 20, 2015 7:19 pm
by JAFO
And what are you trying to Decode?
If it's FRNSW, good luck as most messages are passed via mobile phone theses days
Re: Pager decoding software
Posted: Fri Aug 21, 2015 10:28 am
by Adapad
JAFO wrote:And what are you trying to Decode?
If it's FRNSW, good luck as most messages are passed via mobile phone theses days
Rfs
Re: Pager decoding software
Posted: Sat Aug 22, 2015 10:54 pm
by astro_boy
Adapad wrote:
Will this work with 996t or 396xt
Should do.
Re: Pager decoding software
Posted: Sun Aug 23, 2015 12:52 pm
by Adapad
The pager system is crap in the area where I live so im using it as a backup